Items where Author is "Despont, M."

2005

Lee, D. W. and Kang, J. H. and Gysin, U. and Rast, S. and Meyer, E. and Despont, M. and Gerber, C.. (2005) Fabrication and evaluation of single-crystal silicon cantilevers with ultra-low spring constants. Journal of micromechanics and microengineering, Vol. 15, H. 11. pp. 2179-2183.

Yang, J. L. and Despont, M. and Drechsler, U. and Hoogenboom, B. W. and Frederix, P. L. T. M. and Martin, S. and Engel, A. and Vettiger, P. and Hug, H. J.. (2005) Miniaturized single-crystal silicon cantilevers for scanning force microscopy. Applied Physics Letters, Vol. 86. p. 134101.

2004

Ghatkesar, Murali K. and Barwich, V. and Braun, T. and Bredekamp, A. H. and Drechsler, U. and Despont, M. and Lang, H. P. and Hegner, M. and Gerber, C.. (2004) Real-time mass sensing by nanomechanical resonators in fluid. In: Proceedings of the IEEE Sensors 2004, 2. Piscataway, New Jersey, pp. 1060-1063.

Lee, D. and Wetzel, A. and Bennewitz, R. and Meyer, E. and Despont, M. and Vettiger, P. and Gerber, C.. (2004) Switchable cantilever for a time-of-flight scanning force microscope. Applied physics letters, Vol. 84, H. 9. pp. 1558-1560.

2003

Lee, D. W. and Despont, M. and Drechsler, U. and Gerber, C. and Vettiger, P. and Wetzel, A. and Bennewitz, R. and Meyer, E.. (2003) Switchable cantilever fabrication for a novel time-of-flight scanning force microscope. Microelectronic engineering, Vol. 67-68. pp. 635-643.

2000

Baller, M. K. and Lang, H. P. and Fritz, J. and Gerber, C. and Gimzewski, J. K. and Drechsler, U. and Rothuizen, H. and Despont, M. and Vettiger, P. and Battiston, F. M. and Ramseyer, J. P. and Fornaro, P. and Meyer, E. and Guntherodt, H. J.. (2000) A cantilever array-based artificial nose. Ultramicroscopy, Vol. 82, H. 1-4. pp. 1-9.

1998

Lang, H. P. and Berger, R. and Battiston, F. and Ramseyer, J. P. and Meyer, E. and Andreoli, C. and Brugger, J. and Vettiger, P. and Despont, M. and Mezzacasa, T. and Scandella, L. and Guntherodt, H. J. and Gerber, C. and Gimzewski, J. K.. (1998) A chemical sensor based on a micromechanical cantilever array for the identification of gases and vapors. Applied physics. A, Materials science & processing, Vol. 66, Part 1 Suppl. S , S61-S64.

Lang, H. P. and Berger, R. and Andreoli, C. and Brugger, J. and Despont, M. and Vettiger, P. and Gerber, C. and Gimzewski, J. K. and Ramseyer, J. P. and Meyer, E. and Guntherodt, H. J.. (1998) Sequential position readout from arrays of micromechanical cantilever sensors. Applied physics letters, Vol. 72, H. 3. pp. 383-385.